Smart Camera - pictor M58C-ETH-IRCut

pictor M58C-ETH-IRCut
Short description:

smart camera, ethernet, 1/3" CCD, 1024x768, color, 16fps, TI-400MHz, IR cut fil.

Order number:
4-20-325
Downloads:
Characteristics

  • smart camera for industrial image processing
  • available with monochrome or color sensor
  • more compact design than comparable pictor® M devices
  • cost-effective alternative to devices with SVGA output
  • consistent functional and operating concept, range of functions is compatible with vicosys® vision systems
  • extensive optics and lighting accessories

Technical data
Sensor Data
Sensor nameSony ICX204AK
ChromaColour
IR cut filter 400 nm - 700 nm
Sensor format1/3"
Sensor diagonal5.95 mm
Sensor technologyProgressive Scan CCD
Readout methodGlobal Shutter
Resolution total0.8 MPixel
Number of pixel1024 x 768 Pixel
Pixel size4.65 µm x 4.65 µm
Frame rate16 fps
Shutter (exposure time)46 µs ... 2 s
Performance Data
Processor3200 MIPS, 400 MHz Texas Instruments TMS320C64xx
RAM32 MB SDRAM
Flash EPROM4 MB Flash EPROM for programs and data
3 MB for users
Prozessinterface
Communication interfaces1 x Ethernet 100Mbit
Process interface4 x digitale Eingangskanal
4 x digitaler Ausgangskanal
1 x Trigger-, RS232- oder Key-Pad-Anschluss
Software
ParameterizationOperating software vcwin
General Data
Power requirements9 V ... 30 V DC über 12-pin Hirose oder Steckernetzteil
Lens mountC-Mount
Dimensions85 mm x 50 mm x 44 mm (without connectors)
Weight250 g
Degree of protection (IP)IP50
Safety classClass III, safety extra low voltage (SELV)
Operating temperature0 °C ... 50 °C
Drawings
Dimensional drawing in mm
Relative Quantum Efficiency of the Imager

Accessories for Lighting - pictor M58C-ETH-IRCut

Order number Title Description
Ethernet Cables
4-40-203 Ethernet cable, 6p, 5m HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204 Ethernet cable, 6p, 10m HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223 PLC-power cable, 12p, 5m HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224 PLC-power cable, 12p, 10m HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225 PLC-power cable, 12p, 25m HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply
4-40-219 Power supply 24V/40W/1.7A for DIN rail mounting, Type: MDR-40-24 for pictor M/N
Power supply units
4-40-209 Power supply 24V/0.63A HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Trigger Cable
4-40-200 Trigger cable, 6p, 5m 6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-201 Trigger cable, 6p, 10m 6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-202 Trigger cable, 6p, 25m 6-pin HIROSE plug with pin contacts to open cable end, for pictor M
V24 Cable C4 (RS232)
4-40-181 V24-RS232 cabel, 6p, 5m 6-pin HIROSE plug to 9-pin Sub-D socket, for pictor M16xx/M18xx and Mxx
4-40-182 V24-RS232 cabel, 6p, 10m 6-pin HIROSE plug to 9-pin Sub-D socket, for pictor M16xx/M18xx and Mxx
4-40-183 V24-RS232 cabel, 6p, 25m 6-pin HIROSE plug to 9-pin Sub-D socket, for pictor M16xx/M18xx and Mxx
Operating Devices
4-20-207 Key-Pad for pictor M16xx/18xx Key-Pad incl. connection cable, 5m, to operate the vcwin pro monitor menus
Fieldbus Gateways
3-90-029 Gateway netTAP 100-RE-EN Modbus TCP slave to EtherCAT slave, for pictor and vicosys
3-90-028 Gateway netTAP 50-DP-EN Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys