LED Lighting Controller - DLC3005-R

DLC3005-R
Short description:

LED lighting controller, digital, cont./flash current: 4.8A/18A, DIN rail mounting

Order number:
1-30-209
Downloads:
Characteristics

  • digital lighting controller for high-performance LED lighting of all kinds
  • enormous power density - up to 400 W in flash mode
  • two digital PLC-compatible inputs and two outputs each
  • simple operation via web interface or rotary switch
  • compact, robust and space-saving design
  • simple direct mounting on a DIN rail
  • also suitable as a power source for LED lighting from other manufacturers

Technical data
Operating voltage24 VDC (10 - 30 V)
Power consumption without lighting40 mA
Lighting interface
Output voltage0 ... 22 VDC
Continuous operation:
• Output current50 mA ... 4.8 A
• Output powermax. 105 W
Flash mode:
• Output current1 A ... 18.4 A
• Output powermax. 406 W
• Flash time≥ 40 µs
Further interfaces
Trigger inputgenerates flash signals for connected lighting
Enable inputswitches the connected lighting into continuous operation
Status outputdisplays the current operating state including error monitoring, status events are recorded internally
Trigger outputgenerates a trigger signal synchronously to the flash signal
Standards
Signal standards24V I/O industry standard
NPN sensor signals
PNP sensor signals
Open collector signals
Trigger modeslow-active: NPN-switching
High-active: PNP-switching (5V) or
24V I/O industry standard
Active trigger edgehigh-low-flank
General Parameters
Housing materialAluminum housing, side covers made of plastic
Dimensions74 mm x 55.8 mm x 27.9 mm
Weight125 g
Degree of protectionIP 40
Safety classClass III, safety extra low voltage (SELV)
Ambient Conditions0 °C ... 40 °C
Drawings
Dimensional drawing in mm

Accessories for Lighting - DLC3005-R

Order number Title Description
LED Controller DLC3005
1-30-222 Cable DLC3005 - 1.0 m to connect the DLC3005 to a current source,PTSM0.5/2-P-2.5 to cable open end, 2x0,5mm²
1-30-223 Cable DLC3005 - 2.0 m to connect the DLC3005 to a current source,PTSM0.5/2-P-2.5 to cable open end, 2x0,5mm²
1-30-207 USB cable Type-A/Micro-B - 1 m to connect the DLC3005 to a PC, USB 2.0 Type-A plug to micro-B plug, length: 1.0m
1-30-206 DLC3005 Connector-Set 3 connectors for connecting operating voltage, I/O port and lighting (without cable)
1-30-208 Cable M8-4pol to PTSM - 0.15 m to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 0.15m
1-30-211 Cable M8-4pol to PTSM - 1 m to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 1 m
1-30-212 Cable M8-4pol to PTSM - 2 m to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 2 m
1-30-213 Cable M8-4pol to PTSM - 3 m to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 3 m