Lighting controllers of Vision & Control provide for stable lighting conditions and a high failure security of LED-lights in the industrial sphere. They are easy to use and to integrate in the operation.
The smart light-lighting controller DLC3005 supervises on-line all working conditions of the lighting and guarantees the safe and undisturbed operation free of failure of the connected lighting within their achievement borders with suitable configuration.
Title:
Short description:
LED lighting controller, digital, cont./flash current: 4.8A/18A, wall mounting
Order number:
1-30-202
Downloads:
Characteristics
- digital lighting controller for high-performance LED lighting of all kinds
- enormous power density - up to 400 W in flash mode
- two digital PLC-compatible inputs and two outputs each
- simple operation via web interface or rotary switch
- compact, robust and space-saving design
- simple direct assembly using mounting tabs
- also suitable as a power source for LED lighting from other manufacturers
Technical data
| Operating voltage | 10 ... 30 V DC |
| Power consumption without lighting | 40 mA |
| Lighting interface | |
| Output voltage | 0 ... 22 VDC |
| Continuous operation: | |
| • Output current | 50 mA ... 4.8 A |
| • Output power | max. 105 W |
| Flash mode: | |
| • Output current | 1 A ... 18.4 A |
| • Output power | max. 406 W |
| • Flash time | 50 µs ... 500 µs |
| Further interfaces | |
| Trigger input | generates flash signals for connected lighting |
| Enable input | switches the connected lighting into continuous operation |
| Status output | displays the current operating state including error monitoring, status events are recorded internally |
| Trigger output | generates a trigger signal synchronously to the flash signal |
| Standards | |
| Signal standards | 24V I/O industry standard NPN sensor signals PNP sensor signals Open collector signals |
| Trigger modes | low-active: NPN-switching High-active: PNP-switching (5V) or 24V I/O industry standard |
| Active trigger edge | high-low-flank |
| General Parameters | |
| Housing material | Aluminum housing, side covers made of plastic |
| Dimensions | 74 mm x 71 mm x 20.8 mm |
| Weight | 105 g |
| Degree of protection | IP 40 |
| Safety class | III, safety extra-low voltage (SELV) |
| Ambient Conditions | 0 °C ... 40 °C |
Drawings
Dimensional drawing in mm
Accessories
| Order number | Title | Description |
|---|---|---|
| LED Controller DLC3005 | ||
| 1-30-222 | Cable DLC3005 - 1.0 m | to connect the DLC3005 to a current source,PTSM0.5/2-P-2.5 to cable open end, 2x0,5mm² |
| 1-30-223 | Cable DLC3005 - 2.0 m | to connect the DLC3005 to a current source,PTSM0.5/2-P-2.5 to cable open end, 2x0,5mm² |
| 1-30-207 | USB cable Type-A/Micro-B - 1 m | to connect the DLC3005 to a PC, USB 2.0 Type-A plug to micro-B plug, length: 1.0m |
| 1-30-206 | DLC3005 Connector-Set | 3 connectors for connecting operating voltage, I/O port and lighting (without cable) |
| 1-30-208 | Cable M8-4pol to PTSM - 0.15 m | to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 0.15m |
| 1-30-224 | Cable M8-4pol to PTSM - 0.5 m | to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 0.5 m |
| 1-30-211 | Cable M8-4pol to PTSM - 1 m | to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 1 m |
| 1-30-212 | Cable M8-4pol to PTSM - 2 m | to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 2 m |
| 1-30-213 | Cable M8-4pol to PTSM - 3 m | to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 3 m |
Title:
Short description:
LED lighting controller, digital, cont./flash current: 4.8A/18A, DIN rail mounting
Order number:
1-30-209
Downloads:
Characteristics
- digital lighting controller for high-performance LED lighting of all kinds
- enormous power density - up to 400 W in flash mode
- two digital PLC-compatible inputs and two outputs each
- simple operation via web interface or rotary switch
- compact, robust and space-saving design
- simple direct mounting on a DIN rail
- also suitable as a power source for LED lighting from other manufacturers
Technical data
| Operating voltage | 10 ... 30 V DC |
| Power consumption without lighting | 40 mA |
| Lighting interface | |
| Output voltage | 0 ... 22 VDC |
| Continuous operation: | |
| • Output current | 50 mA ... 4.8 A |
| • Output power | max. 105 W |
| Flash mode: | |
| • Output current | 1 A ... 18.4 A |
| • Output power | max. 406 W |
| • Flash time | 50 µs ... 500 µs |
| Further interfaces | |
| Trigger input | generates flash signals for connected lighting |
| Enable input | switches the connected lighting into continuous operation |
| Status output | displays the current operating state including error monitoring, status events are recorded internally |
| Trigger output | generates a trigger signal synchronously to the flash signal |
| Standards | |
| Signal standards | 24V I/O industry standard NPN sensor signals PNP sensor signals Open collector signals |
| Trigger modes | low-active: NPN-switching High-active: PNP-switching (5V) or 24V I/O industry standard |
| Active trigger edge | high-low-flank |
| General Parameters | |
| Housing material | Aluminum housing, side covers made of plastic |
| Dimensions | 74 mm x 55.8 mm x 27.9 mm |
| Weight | 125 g |
| Degree of protection | IP 40 |
| Safety class | III, safety extra-low voltage (SELV) |
| Ambient Conditions | 0 °C ... 40 °C |
Drawings
Dimensional drawing in mm
Accessories
| Order number | Title | Description |
|---|---|---|
| LED Controller DLC3005 | ||
| 1-30-222 | Cable DLC3005 - 1.0 m | to connect the DLC3005 to a current source,PTSM0.5/2-P-2.5 to cable open end, 2x0,5mm² |
| 1-30-223 | Cable DLC3005 - 2.0 m | to connect the DLC3005 to a current source,PTSM0.5/2-P-2.5 to cable open end, 2x0,5mm² |
| 1-30-207 | USB cable Type-A/Micro-B - 1 m | to connect the DLC3005 to a PC, USB 2.0 Type-A plug to micro-B plug, length: 1.0m |
| 1-30-206 | DLC3005 Connector-Set | 3 connectors for connecting operating voltage, I/O port and lighting (without cable) |
| 1-30-208 | Cable M8-4pol to PTSM - 0.15 m | to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 0.15m |
| 1-30-224 | Cable M8-4pol to PTSM - 0.5 m | to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 0.5 m |
| 1-30-211 | Cable M8-4pol to PTSM - 1 m | to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 1 m |
| 1-30-212 | Cable M8-4pol to PTSM - 2 m | to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 2 m |
| 1-30-213 | Cable M8-4pol to PTSM - 3 m | to connect the lighting to DLC3005; M8-Socket, 4-pin to PTSM 0.5/4-P-2.5 length: 3 m |
Facts worth knowing about vicolux® smart light technology
"One-wire" communication between lighting and power source and "smart light parameters" that are stored in the lighting unit enable the lighting controller to adapt automatically to the attached LED lighting.
The controller also continuously records and evaluates the operating status of the lighting and thereby protects it from fast aging and destruction.
vicolux® smart light technology
- Ensures compliance with the works settings for the limit values of LED lighting in continuous and flash operation
- Provides parameters for, say, maximum current at an ambient temperature of 25 °C and free convection and supports integration of the lighting into the image processing system
- Monitors, in addition to flash current, switching-on and interval times (the duty cycle) in flash operation
Each lighting unit incorporates the brightness value setting of the first illumination batch manufactured at Vision & Control. That enables the user to adjust, if required, the brightness of future units that might be brighter to the brightness of the first batch.