Productfinder for pictor^® smart cameras

Select your requirements here and see all the relevant results below.

Things to know about smart cameras

Productview

Product information

Request a quotation (0)

Title:

pictor N403M-ETH

Short description:

smart camera, ethernet, 1/4" CMOS, 736x480, mono, 120fps, incl. software vcwin

Order number:

3-12-500

EAN:

4251692610022

Downloads:

Show details

Characteristics

smart camera for industrial image processing
particularly compact and space-saving design
integrated HMI for process visualization
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
on average 2.5 times faster than comparable pictor^® M devices
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	e2v EV76C541
Chroma	Monochrome IR cut filter 400 nm - 700 nm
Sensor format	1/4"
Sensor diagonal	4.01 mm
Sensor technology	CMOS
Readout method	Global Shutter
Resolution total	0.3 MPixel
Number of pixel	752 x 480 Pixel
Pixel size	4.5 µm x 4.5 µm
Frame rate	125 fps
Shutter (exposure time)	min. 34 µs
Performance Data
Processor	Dual-Core ARM^®Cortex^®-A9 with 866MHz and integrated FPGA
RAM	512 MB DDR-SDRAM
Flash EPROM	16 GB - of which approx. 12 GB free for test programs and images
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	2 x digitaler Eingangskanal 4 x digitale Ausgangskanal 1 x Trigger-Eingang für Bildaufnahme 1 x Trigger-Ausgang für Blitz
Software
Parameterization	Operating software vcwin
Operation	Process visualization and configuration via integrated webHMI
General Data
Power requirements	12 V ... 30 V DC via 12-pin Hirose or power supply
Lens mount	CS-Mount, C-Mount (with adapter)
Dimensions	80 mm x 45 mm x 20 mm (without connectors)
Weight	175 g
Degree of protection (IP)	IP20
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Spectral response and quantum efficiency

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor N403C-ETH

Short description:

smart camera, ethernet, 1/4" CMOS, 736x480, color, 120fps, incl. software vcwin

Order number:

3-12-501

EAN:

4251692610015

Downloads:

Show details

Characteristics

smart camera for industrial image processing
particularly compact and space-saving design
integrated HMI for process visualization
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
on average 2.5 times faster than comparable pictor^® M devices
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	e2v EV76C541
Chroma	Colour IR cut filter 400 nm - 700 nm
Sensor format	1/4"
Sensor diagonal	4.01 mm
Sensor technology	CMOS
Readout method	Global Shutter
Resolution total	0.3 MPixel
Number of pixel	752 x 480 Pixel
Pixel size	4.5 µm x 4.5 µm
Frame rate	125 fps
Shutter (exposure time)	min. 34 µs
Performance Data
Processor	Dual-Core ARM^®Cortex^®-A9 with 866MHz and integrated FPGA
RAM	512 MB DDR-SDRAM
Flash EPROM	16 GB - of which approx. 12 GB free for test programs and images
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	2 x digitaler Eingangskanal 4 x digitale Ausgangskanal 1 x Trigger-Eingang für Bildaufnahme 1 x Trigger-Ausgang für Blitz
Software
Parameterization	Operating software vcwin
Operation	Process visualization and configuration via integrated webHMI
General Data
Power requirements	12 V ... 30 V DC via 12-pin Hirose or power supply
Lens mount	CS-Mount, C-Mount (with adapter)
Dimensions	80 mm x 45 mm x 20 mm (without connectors)
Weight	175 g
Degree of protection (IP)	IP20
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Spectral response and quantum efficiency

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor N413M-ETH

Short description:

smart camera, ethernet, 1/1,8" CMOS, 1280x1024, mono, 63fps, incl. software vcwin

Order number:

3-12-502

EAN:

4251692610046

Downloads:

Show details

Characteristics

smart camera for industrial image processing
particularly compact and space-saving design
integrated HMI for process visualization
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
on average 2.5 times faster than comparable pictor^® M devices
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	e2v EV76C560
Chroma	Monochrome IR cut filter 400 nm - 700 nm
Sensor format	1/1.8"
Sensor diagonal	8.69 mm
Sensor technology	CMOS
Readout method	Global Shutter
Resolution total	1.3 MPixel
Number of pixel	1280 x 1024 Pixel
Pixel size	5.3 µm x 5.3 µm
Frame rate	63 fps
Shutter (exposure time)	min. 15 µs
Performance Data
Processor	Dual-Core ARM^®Cortex^®-A9 with 866MHz and integrated FPGA
RAM	512 MB DDR-SDRAM
Flash EPROM	16 GB - of which approx. 12 GB free for test programs and images
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	2 x digitaler Eingangskanal 4 x digitale Ausgangskanal 1 x Trigger-Eingang für Bildaufnahme 1 x Trigger-Ausgang für Blitz
Software
Parameterization	Operating software vcwin
Operation	Process visualization and configuration via integrated webHMI
General Data
Power requirements	12 V ... 30 V DC via 12-pin Hirose or power supply
Lens mount	CS-Mount, C-Mount (with adapter)
Dimensions	80 mm x 45 mm x 20 mm (without connectors)
Weight	175 g
Degree of protection (IP)	IP20
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Spectral response and quantum efficiency

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor N413NIR-ETH

Short description:

smart camera, ethernet, 1/1,8" CMOS, 1280x1024, NIR, 63fps, incl. software vcwin

Order number:

3-12-510

EAN:

4251692610053

Downloads:

Show details

Characteristics

smart camera for industrial image processing
particularly compact and space-saving design
integrated HMI for process visualization
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
on average 2.5 times faster than comparable pictor^® M devices
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	e2v EV76C661
Chroma	Monochrome (NIR+)
Sensor format	1/1.8"
Sensor diagonal	8.69 mm
Sensor technology	CMOS
Readout method	Global Shutter
Resolution total	1.3 MPixel
Number of pixel	1280 x 1024 Pixel
Pixel size	5.3 µm x 5.3 µm
Frame rate	63 fps
Shutter (exposure time)	min. 15 µs
Performance Data
Processor	Dual-Core ARM^®Cortex^®-A9 with 866MHz and integrated FPGA
RAM	512 MB DDR-SDRAM
Flash EPROM	16 GB - of which approx. 12 GB free for test programs and images
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	2 x digitaler Eingangskanal 4 x digitale Ausgangskanal 1 x Trigger-Eingang für Bildaufnahme 1 x Trigger-Ausgang für Blitz
Software
Parameterization	Operating software vcwin
Operation	Process visualization and configuration via integrated webHMI
General Data
Power requirements	12 V ... 30 V DC via 12-pin Hirose or power supply
Lens mount	CS-Mount, C-Mount (with adapter)
Dimensions	80 mm x 45 mm x 20 mm (without connectors)
Weight	175 g
Degree of protection (IP)	IP20
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Spectral response and quantum efficiency

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor N413C-ETH

Short description:

smart camera, ethernet, 1/1,8" CMOS, 1280x1024, color, 63fps, incl. software vcwin

Order number:

3-12-503

EAN:

4251692610039

Downloads:

Show details

Characteristics

smart camera for industrial image processing
particularly compact and space-saving design
integrated HMI for process visualization
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
on average 2.5 times faster than comparable pictor^® M devices
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	e2v EV76C560
Chroma	Colour IR cut filter 400 nm - 700 nm
Sensor format	1/1.8"
Sensor diagonal	8.69 mm
Sensor technology	CMOS
Readout method	Global Shutter
Resolution total	1.3 MPixel
Number of pixel	1280 x 1024 Pixel
Pixel size	5.3 µm x 5.3 µm
Frame rate	63 fps
Shutter (exposure time)	min. 15 µs
Performance Data
Processor	Dual-Core ARM^®Cortex^®-A9 with 866MHz and integrated FPGA
RAM	512 MB DDR-SDRAM
Flash EPROM	16 GB - of which approx. 12 GB free for test programs and images
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	2 x digitaler Eingangskanal 4 x digitale Ausgangskanal 1 x Trigger-Eingang für Bildaufnahme 1 x Trigger-Ausgang für Blitz
Software
Parameterization	Operating software vcwin
Operation	Process visualization and configuration via integrated webHMI
General Data
Power requirements	12 V ... 30 V DC via 12-pin Hirose or power supply
Lens mount	CS-Mount, C-Mount (with adapter)
Dimensions	80 mm x 45 mm x 20 mm (without connectors)
Weight	175 g
Degree of protection (IP)	IP20
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Spectral response and quantum efficiency

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor N420M-ETH

Short description:

smart camera, ethernet, 1/1,8" CMOS, 1600x1200, mono, 55fps, incl. software vcwin

Order number:

3-12-504

EAN:

4251692610077

Downloads:

Show details

Characteristics

smart camera for industrial image processing
particularly compact and space-saving design
integrated HMI for process visualization
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
on average 2.5 times faster than comparable pictor^® M devices
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	e2v EV76C570
Chroma	Monochrome IR cut filter 400 nm - 700 nm
Sensor format	1/1.8"
Sensor diagonal	9.0 mm
Sensor technology	CMOS
Readout method	Global Shutter
Resolution total	2.0 MPixel
Number of pixel	1600 x 1200 Pixel
Pixel size	4.5 µm x 4.5 µm
Frame rate	55 fps
Shutter (exposure time)	min. 15 µs
Performance Data
Processor	Dual-Core ARM^®Cortex^®-A9 with 866MHz and integrated FPGA
RAM	512 MB DDR-SDRAM
Flash EPROM	16 GB - of which approx. 12 GB free for test programs and images
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	2 x digitaler Eingangskanal 4 x digitale Ausgangskanal 1 x Trigger-Eingang für Bildaufnahme 1 x Trigger-Ausgang für Blitz
Software
Parameterization	Operating software vcwin
Operation	Process visualization and configuration via integrated webHMI
General Data
Power requirements	12 V ... 30 V DC via 12-pin Hirose or power supply
Lens mount	CS-Mount, C-Mount (with adapter)
Dimensions	80 mm x 45 mm x 20 mm (without connectors)
Weight	175 g
Degree of protection (IP)	IP20
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Spectral response and quantum efficiency

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor N420C-ETH

Short description:

smart camera, ethernet, 1/1,8" CMOS, 1600x1200, color, 55fps, incl. software vcwin

Order number:

3-12-505

EAN:

4251692610060

Downloads:

Show details

Characteristics

smart camera for industrial image processing
particularly compact and space-saving design
integrated HMI for process visualization
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
on average 2.5 times faster than comparable pictor^® M devices
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	e2v EV76C570
Chroma	Colour IR cut filter 400 nm - 700 nm
Sensor format	1/1.8"
Sensor diagonal	9.0 mm
Sensor technology	CMOS
Readout method	Global Shutter
Resolution total	2.0 MPixel
Number of pixel	1600 x 1200 Pixel
Pixel size	4.5 µm x 4.5 µm
Frame rate	55 fps
Shutter (exposure time)	min. 15 µs
Performance Data
Processor	Dual-Core ARM^®Cortex^®-A9 with 866MHz and integrated FPGA
RAM	512 MB DDR-SDRAM
Flash EPROM	16 GB - of which approx. 12 GB free for test programs and images
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	2 x digitaler Eingangskanal 4 x digitale Ausgangskanal 1 x Trigger-Eingang für Bildaufnahme 1 x Trigger-Ausgang für Blitz
Software
Parameterization	Operating software vcwin
Operation	Process visualization and configuration via integrated webHMI
General Data
Power requirements	12 V ... 30 V DC via 12-pin Hirose or power supply
Lens mount	CS-Mount, C-Mount (with adapter)
Dimensions	80 mm x 45 mm x 20 mm (without connectors)
Weight	175 g
Degree of protection (IP)	IP20
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Spectral response and quantum efficiency

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor N432M-ETH

Short description:

smart camera, ethernet, 1/1,8" CMOS, 2048x1536, mono, 88fps, incl. software vcwin

Order number:

3-12-506

EAN:

4251692610091

Downloads:

Show details

Characteristics

smart camera for industrial image processing
particularly compact and space-saving design
integrated HMI for process visualization
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
on average 2.5 times faster than comparable pictor^® M devices
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	Sony IMX252 Pregius
Chroma	Monochrome IR cut filter 400 nm - 700 nm
Sensor format	1/1.8"
Sensor diagonal	8.83 mm
Sensor technology	CMOS
Readout method	Global Shutter
Resolution total	3.2 MPixel
Number of pixel	2048 x 1536 Pixel
Pixel size	3.45 µm x 3.45 µm
Frame rate	88 fps
Shutter (exposure time)	min. 5 µs
Performance Data
Processor	Dual-Core ARM^®Cortex^®-A9 with 866MHz and integrated FPGA
RAM	512 MB DDR-SDRAM
Flash EPROM	16 GB - of which approx. 12 GB free for test programs and images
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	2 x digitaler Eingangskanal 4 x digitale Ausgangskanal 1 x Trigger-Eingang für Bildaufnahme 1 x Trigger-Ausgang für Blitz
Software
Parameterization	Operating software vcwin
Operation	Process visualization and configuration via integrated webHMI
General Data
Power requirements	12 V ... 30 V DC via 12-pin Hirose or power supply
Lens mount	CS-Mount, C-Mount (with adapter)
Dimensions	80 mm x 45 mm x 20 mm (without connectors)
Weight	175 g
Degree of protection (IP)	IP20
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor M58M-ETH-IRCut

Short description:

smart camera, ethernet, 1/3" CCD, 1024x768, mono, 16fps, TI-400MHz, IR cut fil.

Order number:

4-20-323

EAN:

4251692612057

Downloads:

Show details

Characteristics

smart camera for industrial image processing
available with monochrome or color sensor
more compact design than comparable pictor^® M devices
cost-effective alternative to devices with SVGA output
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	Sony ICX204AL
Chroma	Monochrome IR cut filter 400 nm - 700 nm
Sensor format	1/3"
Sensor diagonal	5.95 mm
Sensor technology	Progressive Scan CCD
Readout method	Global Shutter
Resolution total	0.8 MPixel
Number of pixel	1024 x 768 Pixel
Pixel size	4.65 µm x 4.65 µm
Frame rate	16 fps
Shutter (exposure time)	46 µs ... 2 s
Performance Data
Processor	3200 MIPS, 400 MHz Texas Instruments TMS320C64xx
RAM	32 MB SDRAM
Flash EPROM	4 MB Flash EPROM for programs and data 3 MB for users
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	4 x digital input channel 4 x digital output channel 1 x trigger, RS232 or Key-Pad connection
Software
Parameterization	Operating software vcwin
General Data
Power requirements	9 V ... 30 V DC via 12-pin Hirose or power supply
Lens mount	C-Mount
Dimensions	85 mm x 50 mm x 44 mm (without connectors)
Weight	250 g
Degree of protection (IP)	IP50
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Relative Quantum Efficiency of the Imager

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Trigger Cable
4-40-200	Trigger cable, 6p, 5m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-201	Trigger cable, 6p, 10m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-202	Trigger cable, 6p, 25m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
V24 Cable C4 (RS232)
4-40-181	V24-RS232 cabel, 6p, 5m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-182	V24-RS232 cabel, 6p, 10m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-183	V24-RS232 cabel, 6p, 25m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
Operating Devices
4-20-207	Key-Pad for pictor M16xx/18xx	Key-Pad incl. connection cable, 5 m, to operate the vcwin monitor menus
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor M58C-ETH-IRCut

Short description:

smart camera, ethernet, 1/3" CCD, 1024x768, color, 16fps, TI-400MHz, IR cut fil.

Order number:

4-20-325

EAN:

4251692612033

Downloads:

Show details

Characteristics

smart camera for industrial image processing
available with monochrome or color sensor
more compact design than comparable pictor^® M devices
cost-effective alternative to devices with SVGA output
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	Sony ICX204AK
Chroma	Colour IR cut filter 400 nm - 700 nm
Sensor format	1/3"
Sensor diagonal	5.95 mm
Sensor technology	Progressive Scan CCD
Readout method	Global Shutter
Resolution total	0.8 MPixel
Number of pixel	1024 x 768 Pixel
Pixel size	4.65 µm x 4.65 µm
Frame rate	16 fps
Shutter (exposure time)	46 µs ... 2 s
Performance Data
Processor	3200 MIPS, 400 MHz Texas Instruments TMS320C64xx
RAM	32 MB SDRAM
Flash EPROM	4 MB Flash EPROM for programs and data 3 MB for users
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	4 x digital input channel 4 x digital output channel 1 x trigger, RS232 or Key-Pad connection
Software
Parameterization	Operating software vcwin
General Data
Power requirements	9 V ... 30 V DC via 12-pin Hirose or power supply
Lens mount	C-Mount
Dimensions	85 mm x 50 mm x 44 mm (without connectors)
Weight	250 g
Degree of protection (IP)	IP50
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Relative Quantum Efficiency of the Imager

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Trigger Cable
4-40-200	Trigger cable, 6p, 5m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-201	Trigger cable, 6p, 10m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-202	Trigger cable, 6p, 25m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
V24 Cable C4 (RS232)
4-40-181	V24-RS232 cabel, 6p, 5m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-182	V24-RS232 cabel, 6p, 10m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-183	V24-RS232 cabel, 6p, 25m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
Operating Devices
4-20-207	Key-Pad for pictor M16xx/18xx	Key-Pad incl. connection cable, 5 m, to operate the vcwin monitor menus
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor M58M-ETH-CLR

Short description:

smart camera, ethernet, 1/3" CCD, 1024x768, mono, 16fps, TI-400MHz, clear glass

Order number:

4-20-324

EAN:

4251692612040

Downloads:

Show details

Characteristics

smart camera for industrial image processing
available with monochrome or color sensor
more compact design than comparable pictor^® M devices
cost-effective alternative to devices with SVGA output
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	Sony ICX204AL
Chroma	Monochrome - clear glass filter
Sensor format	1/3"
Sensor diagonal	5.95 mm
Sensor technology	Progressive Scan CCD
Readout method	Global Shutter
Resolution total	0.8 MPixel
Number of pixel	1024 x 768 Pixel
Pixel size	4.65 µm x 4.65 µm
Frame rate	16 fps
Shutter (exposure time)	46 µs ... 2 s
Performance Data
Processor	3200 MIPS, 400 MHz Texas Instruments TMS320C64xx
RAM	32 MB SDRAM
Flash EPROM	4 MB Flash EPROM for programs and data 3 MB for users
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	4 x digital input channel 4 x digital output channel 1 x trigger, RS232 or Key-Pad connection
Software
Parameterization	Operating software vcwin
General Data
Power requirements	9 V ... 30 V DC via 12-pin Hirose or power supply
Lens mount	C-Mount
Dimensions	85 mm x 50 mm x 44 mm (without connectors)
Weight	250 g
Degree of protection (IP)	IP50
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Relative Quantum Efficiency of the Imager

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Trigger Cable
4-40-200	Trigger cable, 6p, 5m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-201	Trigger cable, 6p, 10m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-202	Trigger cable, 6p, 25m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
V24 Cable C4 (RS232)
4-40-181	V24-RS232 cabel, 6p, 5m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-182	V24-RS232 cabel, 6p, 10m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-183	V24-RS232 cabel, 6p, 25m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
Operating Devices
4-20-207	Key-Pad for pictor M16xx/18xx	Key-Pad incl. connection cable, 5 m, to operate the vcwin monitor menus
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor M58C-ETH-CLR

Short description:

smart camera, ethernet, 1/3" CCD, 1024x768, color, 16fps, TI-400MHz, clear glass

Order number:

4-20-326

EAN:

4251692612026

Downloads:

Show details

Characteristics

smart camera for industrial image processing
available with monochrome or color sensor
more compact design than comparable pictor^® M devices
cost-effective alternative to devices with SVGA output
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	Sony ICX204AK
Chroma	Colour - clear glass filter
Sensor format	1/3"
Sensor diagonal	5.95 mm
Sensor technology	Progressive Scan CCD
Readout method	Global Shutter
Resolution total	0.8 MPixel
Number of pixel	1024 x 768 Pixel
Pixel size	4.65 µm x 4.65 µm
Frame rate	16 fps
Shutter (exposure time)	46 µs ... 2 s
Performance Data
Processor	3200 MIPS, 400 MHz Texas Instruments TMS320C64xx
RAM	32 MB SDRAM
Flash EPROM	4 MB Flash EPROM for programs and data 3 MB for users
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	4 x digital input channel 4 x digital output channel 1 x trigger, RS232 or Key-Pad connection
Software
Parameterization	Operating software vcwin
General Data
Power requirements	9 V ... 30 V DC via 12-pin Hirose or power supply
Lens mount	C-Mount
Dimensions	85 mm x 50 mm x 44 mm (without connectors)
Weight	250 g
Degree of protection (IP)	IP50
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Relative Quantum Efficiency of the Imager

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Trigger Cable
4-40-200	Trigger cable, 6p, 5m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-201	Trigger cable, 6p, 10m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-202	Trigger cable, 6p, 25m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
V24 Cable C4 (RS232)
4-40-181	V24-RS232 cabel, 6p, 5m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-182	V24-RS232 cabel, 6p, 10m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-183	V24-RS232 cabel, 6p, 25m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
Operating Devices
4-20-207	Key-Pad for pictor M16xx/18xx	Key-Pad incl. connection cable, 5 m, to operate the vcwin monitor menus
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor M1606M-ETH-IRCut

Short description:

smart camera, eth., SVGA-Out, 1/3" CCD, 640x480, mono, 63fps, TI-400MHz, IR cut fil.

Order number:

4-20-193

EAN:

4251692612071

Downloads:

Show details

Characteristics

smart camera for industrial image processing
powerful image processing with DSP for extremely rapid image acquisition and processing
SVGA out for the output of test images on the monitor without loss of runtime
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	Sony ICX424 AL
Chroma	Monochrome IR cut filter 400 nm - 700 nm
Sensor format	1/3"
Sensor diagonal	5.92 mm
Sensor technology	Progressive Scan CCD
Readout method	Global Shutter
Resolution total	0.3 MPixel
Number of pixel	640 x 480 Pixel
Pixel size	7.4 µm x 7.4 µm
Frame rate	63 fps
Shutter (exposure time)	5 µs ... 8 s
Performance Data
Processor	3200 MIPS, 400 MHz Texas Instruments TMS320C64xx
RAM	64 MB SDRAM
Flash EPROM	4 MB Flash EPROM for programs and data internal 1 GB SD card for user data
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	4 x digital input channel 4 x digital output channel 1 x trigger, RS232 or Key-Pad connection 1 x Video-Out (800 x 600)
Software
Parameterization	Operating software vcwin
General Data
Power requirements	9 V ... 28 V DC via 12-pin Hirose or power supply
Lens mount	C-Mount
Dimensions	105 mm x 50 mm x 44 mm (without connectors)
Weight	400 g
Degree of protection (IP)	IP50
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Relative Quantum Efficiency of the Imager

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Trigger Cable
4-40-200	Trigger cable, 6p, 5m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-201	Trigger cable, 6p, 10m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-202	Trigger cable, 6p, 25m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
V24 Cable C4 (RS232)
4-40-181	V24-RS232 cabel, 6p, 5m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-182	V24-RS232 cabel, 6p, 10m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-183	V24-RS232 cabel, 6p, 25m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
SVGA monitor cable
4-40-240	SVGA monitor cable, 10p, 5m	10-pin HIROSE plug to 15-pin D-Sub socket, for pictor M with SVGA-output
4-40-241	SVGA monitor cable, 10p, 10m	10-pin HIROSE plug to 15-pin D-Sub socket, for pictor M with SVGA-output
4-40-242	SVGA monitor cable, 10p, 25m	10-pin HIROSE plug to 15-pin D-Sub socket, for pictor M with SVGA-output
Operating Devices
4-20-207	Key-Pad for pictor M16xx/18xx	Key-Pad incl. connection cable, 5 m, to operate the vcwin monitor menus
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor M1617M-ETH-IRCut

Short description:

smart camera, eth., SXVGA-Out, 1/3" CCD, 1024x768, mono, 20fps, TI-400MHz, IR cut fil.

Order number:

4-20-195

EAN:

4251692612095

Downloads:

Show details

Characteristics

smart camera for industrial image processing
powerful image processing with DSP for extremely rapid image acquisition and processing
SVGA out for the output of test images on the monitor without loss of runtime
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	Sony ICX204AL
Chroma	Monochrome IR cut filter 400 nm - 700 nm
Sensor format	1/3"
Sensor diagonal	5.95 mm
Sensor technology	Progressive Scan CCD
Readout method	Global Shutter
Resolution total	0.8 MPixel
Number of pixel	1024 x 768 Pixel
Pixel size	4.65 µm x 4.65 µm
Frame rate	20 fps
Shutter (exposure time)	10 µs ... 16.2 s
Performance Data
Processor	3200 MIPS, 400 MHz Texas Instruments TMS320C64xx
RAM	64 MB SDRAM
Flash EPROM	4 MB Flash EPROM for programs and data internal 1 GB SD card for user data
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	4 x digital input channel 4 x digital output channel 1 x trigger, RS232 or Key-Pad connection 1 x Video-Out (1280 x 1024)
Software
Parameterization	Operating software vcwin
General Data
Power requirements	9 V ... 28 V DC via 12-pin Hirose or power supply
Lens mount	C-Mount
Dimensions	105 mm x 50 mm x 44 mm (without connectors)
Weight	400 g
Degree of protection (IP)	IP50
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Relative Quantum Efficiency of the Imager

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Trigger Cable
4-40-200	Trigger cable, 6p, 5m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-201	Trigger cable, 6p, 10m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-202	Trigger cable, 6p, 25m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
V24 Cable C4 (RS232)
4-40-181	V24-RS232 cabel, 6p, 5m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-182	V24-RS232 cabel, 6p, 10m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-183	V24-RS232 cabel, 6p, 25m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
SVGA monitor cable
4-40-240	SVGA monitor cable, 10p, 5m	10-pin HIROSE plug to 15-pin D-Sub socket, for pictor M with SVGA-output
4-40-241	SVGA monitor cable, 10p, 10m	10-pin HIROSE plug to 15-pin D-Sub socket, for pictor M with SVGA-output
4-40-242	SVGA monitor cable, 10p, 25m	10-pin HIROSE plug to 15-pin D-Sub socket, for pictor M with SVGA-output
Operating Devices
4-20-207	Key-Pad for pictor M16xx/18xx	Key-Pad incl. connection cable, 5 m, to operate the vcwin monitor menus
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Title:

pictor M1606M-ETH-CLR

Short description:

smart camera, eth., SVGA-Out, 1/3" CCD, 640x480, mono, 63fps, TI-400MHz, clear glass

Order number:

4-20-194

EAN:

4251692612064

Downloads:

Show details

Characteristics

smart camera for industrial image processing
powerful image processing with DSP for extremely rapid image acquisition and processing
SVGA out for the output of test images on the monitor without loss of runtime
consistent functional and operating concept, range of functions is compatible with vicosys^® vision systems
extensive optics and lighting accessories

Technical data

Sensor Data
Sensor name	Sony ICX424 AL
Chroma	Monochrome - clear glass filter
Sensor format	1/3"
Sensor diagonal	5.92 mm
Sensor technology	Progressive Scan CCD
Readout method	Global Shutter
Resolution total	0.3 MPixel
Number of pixel	640 x 480 Pixel
Pixel size	7.4 µm x 7.4 µm
Frame rate	63 fps
Shutter (exposure time)	5 µs ... 8 s
Performance Data
Processor	3200 MIPS, 400 MHz Texas Instruments TMS320C64xx
RAM	64 MB SDRAM
Flash EPROM	4 MB Flash EPROM for programs and data internal 1 GB SD card for user data
Prozessinterface
Communication interfaces	1 x Ethernet 100Mbit
Process interface	4 x digital input channel 4 x digital output channel 1 x trigger, RS232 or Key-Pad connection 1 x Video-Out (800 x 600)
Software
Parameterization	Operating software vcwin
General Data
Power requirements	9 V ... 28 V DC via 12-pin Hirose or power supply
Lens mount	C-Mount
Dimensions	105 mm x 50 mm x 44 mm (without connectors)
Weight	400 g
Degree of protection (IP)	IP50
Safety class	Class III, safety extra low voltage (SELV)
Operating temperature	0 °C ... 50 °C

Drawings

Dimensional drawing in mm

Relative Quantum Efficiency of the Imager

Accessories

Order number	Title	Description
Ethernet Cables
4-40-203	Ethernet cable, 6p, 5m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204	Ethernet cable, 6p, 10m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206	Ethernet cable, 6p, 20m	HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223	PLC-power cable, 12p, 5m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224	PLC-power cable, 12p, 10m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225	PLC-power cable, 12p, 25m	HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209	Power supply 24V/0.63A	HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Trigger Cable
4-40-200	Trigger cable, 6p, 5m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-201	Trigger cable, 6p, 10m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-202	Trigger cable, 6p, 25m	6-pin HIROSE plug with pin contacts to open cable end, for pictor M
V24 Cable C4 (RS232)
4-40-181	V24-RS232 cabel, 6p, 5m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-182	V24-RS232 cabel, 6p, 10m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-183	V24-RS232 cabel, 6p, 25m	6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
SVGA monitor cable
4-40-240	SVGA monitor cable, 10p, 5m	10-pin HIROSE plug to 15-pin D-Sub socket, for pictor M with SVGA-output
4-40-241	SVGA monitor cable, 10p, 10m	10-pin HIROSE plug to 15-pin D-Sub socket, for pictor M with SVGA-output
4-40-242	SVGA monitor cable, 10p, 25m	10-pin HIROSE plug to 15-pin D-Sub socket, for pictor M with SVGA-output
Operating Devices
4-20-207	Key-Pad for pictor M16xx/18xx	Key-Pad incl. connection cable, 5 m, to operate the vcwin monitor menus
Fieldbus Gateways
3-90-028	Gateway netTAP 50-DP-EN	Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219	Power supply 24V-40W-1.7A	for DIN rail mounting, without connection cable, type: MDR-40-24

Load more products..