Smart Camera - pictor M41M-ETH-L-CLR

pictor M41M-ETH-L-CLR
Short description:

smart camera, ethernet, CMOS-line-scan 11 kHz, 2048x1, mono, TI-400MHz, clear glass

Order number:
4-20-334
Downloads:
Characteristics

  • smart camera line-scan for industrial image processing
  • available with monochrome or color sensor
  • more compact design than comparable pictor® M devices
  • cost-effective alternative to devices with SVGA output
  • consistent functional and operating concept, range of functions is compatible with vicosys® vision systems
  • extensive optics and lighting accessories

Technical data
Sensor Data
Sensor namePanavision SLIS-2048
ChromaMonochrome - clear glass filter
Sensor format1/3"
Sensor diagonal14,34 mm (line-scan camera)
Sensor technologyCMOS
Readout methodGlobal Shutter
Number of pixel2048 x 1 Pixel
Pixel size7 µm x 7 µm
Frame rate11 kHz
Shutter (exposure time)90 µs ... 21 ms
Performance Data
Processor3200 MIPS, 400 MHz Texas Instruments TMS320C64xx
RAM32 MB SDRAM
Flash EPROM4 MB Flash EPROM for programs and data
3 MB for users
Prozessinterface
Communication interfaces1 x Ethernet 100Mbit
Process interface4 x digitale Eingangskanal
4 x digitaler Ausgangskanal
1 x Trigger-, RS232- oder Key-Pad-Anschluss
Software
ParameterizationOperating software vcwin
General Data
Power requirements9 V ... 30 V DC über 12-pin Hirose oder Steckernetzteil
Lens mountC-Mount
Dimensions85 mm x 50 mm x 44 mm (without connectors)
Weight250 g
Degree of protection (IP)IP50
Safety classClass III, safety extra low voltage (SELV)
Operating temperature0 °C ... 50 °C
Drawings
Dimensional drawing in mm
Relative Quantum Efficiency of the Imager

Accessories for Lighting - pictor M41M-ETH-L-CLR

Order number Title Description
Ethernet Cables
4-40-203 Ethernet cable, 6p, 5m HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204 Ethernet cable, 6p, 10m HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223 PLC-power cable, 12p, 5m HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224 PLC-power cable, 12p, 10m HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225 PLC-power cable, 12p, 25m HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply
4-40-219 Power supply 24V/40W/1.7A for DIN rail mounting, Type: MDR-40-24 for pictor M/N
Power supply units
4-40-209 Power supply 24V/0.63A HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Trigger Cable
4-40-200 Trigger cable, 6p, 5m 6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-201 Trigger cable, 6p, 10m 6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-202 Trigger cable, 6p, 25m 6-pin HIROSE plug with pin contacts to open cable end, for pictor M
V24 Cable C4 (RS232)
4-40-181 V24-RS232 cabel, 6p, 5m 6-pin HIROSE plug to 9-pin Sub-D socket, for pictor M16xx/M18xx and Mxx
4-40-182 V24-RS232 cabel, 6p, 10m 6-pin HIROSE plug to 9-pin Sub-D socket, for pictor M16xx/M18xx and Mxx
4-40-183 V24-RS232 cabel, 6p, 25m 6-pin HIROSE plug to 9-pin Sub-D socket, for pictor M16xx/M18xx and Mxx
Operating Devices
4-20-207 Key-Pad for pictor M16xx/18xx Key-Pad incl. connection cable, 5m, to operate the vcwin pro monitor menus
Fieldbus Gateways
3-90-029 Gateway netTAP 100-RE-EN Modbus TCP slave to EtherCAT slave, for pictor and vicosys
3-90-028 Gateway netTAP 50-DP-EN Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys