Smart Camera - pictor M1821M-ETH-IRCut

pictor M1821M-ETH-IRCut
Short description:

smart camera, eth., UXGA-Out, 1/1,8" CCD, 1600x1200, mono, 10fps, TI-1GHz, IR cut fil.

Order number:
4-20-331
EAN:
4251692612132
Downloads:
Characteristics

  • smart camera for industrial image processing
  • high-end image processing with 1GHz DSP for extremely rapid image acquisition and processing
  • SVGA out for the output of test images on the monitor without loss of runtime
  • consistent functional and operating concept, range of functions is compatible with vicosys® vision systems
  • extensive optics and lighting accessories

Technical data
Sensor Data
Sensor nameSony ICX274AL
ChromaMonochrome
IR cut filter 400 nm - 700 nm
Sensor format1/1.8"
Sensor diagonal8.8 mm
Sensor technologyProgressive Scan CCD
Readout methodGlobal Shutter
Resolution total2.0 MPixel
Number of pixel1600 x 1200 Pixel
Pixel size4.4 µm x 4.4 µm
Frame rate10 fps
Shutter (exposure time)5 µs ... 12.5 s
Performance Data
Processor8000 MIPS, 1 GHz Texas Instruments TMS320C64xx
RAM64 MB SDRAM
Flash EPROM4 MB Flash EPROM for programs and data
internal 1 GB SD card for user data
Prozessinterface
Communication interfaces1 x Ethernet 100Mbit
Process interface4 x digital input channel
4 x digital output channel
1 x trigger, RS232 or Key-Pad connection
1 x Video-Out (1600 x 1200)
Software
ParameterizationOperating software vcwin
General Data
Power requirements9 V ... 28 V DC via 12-pin Hirose or power supply
Lens mountC-Mount
Dimensions105 mm x 50 mm x 44 mm (without connectors)
Weight400 g
Degree of protection (IP)IP50
Safety classClass III, safety extra low voltage (SELV)
Operating temperature0 °C ... 50 °C
Drawings
Dimensional drawing in mm
Relative Quantum Efficiency of the Imager

Accessories for Lighting - pictor M1821M-ETH-IRCut

Order number Title Description
Ethernet Cables
4-40-203 Ethernet cable, 6p, 5m HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-204 Ethernet cable, 6p, 10m HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
4-40-206 Ethernet cable, 6p, 20m HR10A-7P-6S, plug with socket contacts to RJ45 plug, for pictor M/N
PLC-Power Cables
4-40-223 PLC-power cable, 12p, 5m HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-224 PLC-power cable, 12p, 10m HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
4-40-225 PLC-power cable, 12p, 25m HR10A-10P-12S, plug with socket contacts to open cable end, for pictor M/N
Power supply units
4-40-209 Power supply 24V/0.63A HR10A-10P-12S, plug with socket contacts, length 3m, for pictor M/N
Trigger Cable
4-40-200 Trigger cable, 6p, 5m 6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-201 Trigger cable, 6p, 10m 6-pin HIROSE plug with pin contacts to open cable end, for pictor M
4-40-202 Trigger cable, 6p, 25m 6-pin HIROSE plug with pin contacts to open cable end, for pictor M
V24 Cable C4 (RS232)
4-40-181 V24-RS232 cabel, 6p, 5m 6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-182 V24-RS232 cabel, 6p, 10m 6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
4-40-183 V24-RS232 cabel, 6p, 25m 6-pin HIROSE plug to 9-pin D-Sub socket, for pictor M16xx/M18xx and Mxx
SVGA monitor cable
4-40-240 SVGA monitor cable, 10p, 5m 10-pin HIROSE plug to 15-pin D-Sub socket, for pictor M with SVGA-output
4-40-241 SVGA monitor cable, 10p, 10m 10-pin HIROSE plug to 15-pin D-Sub socket, for pictor M with SVGA-output
4-40-242 SVGA monitor cable, 10p, 25m 10-pin HIROSE plug to 15-pin D-Sub socket, for pictor M with SVGA-output
Operating Devices
4-20-207 Key-Pad for pictor M16xx/18xx Key-Pad incl. connection cable, 5 m, to operate the vcwin monitor menus
Fieldbus Gateways
3-90-028 Gateway netTAP 50-DP-EN Modbus TCP slave to PROFIBUS-DP slave, for pictor and vicosys
Power supply
4-40-219 Power supply 24V-40W-1.7A for DIN rail mounting, without connection cable, type: MDR-40-24